Our Showroom and Sail Loft are Closed to the Public. We are open for Online Orders and Curbside Pick-up ONLY

Fish Finder Accessories

This is our collection of mounts, visors, transducer covers, and installation hardware. We are constantly expanding our offerings in this department so check back often. If you do not find what you are looking for please give us a call, 972-241-1498

Want to get rid of that rooster tail screaming off of your transducer? Save spending hours cleaning the spray off the back of the boat with this handy little contraption.
BP1416 Dual Batterang Bro

Description:

Looking for a way to mount your FPV 7ah or 17ah battery in your 8 inch round hatch as found in Hobie and various kayaks?
The Dual Batterang Bro features a unique mounting system involving a precision bat like
FPV10154 - Double Pigtail 
Description:
The double Pigtail is used to split power from the battery to two different accessories. All Connections within the assembly are waterproof.

Assembly Includes:
One "Y" fitting for taking one battery connection
FPV-POWER 12V REGULATOR 1.5A (NEW – Available 8/28/18)

The FPV-POWER 12V Regulator is designed to be used with fishfinders needing a minimum of 11V to run. The reason is that at 11V, the battery will still have between 1/4 to 1/3 capacity left however
FPV-POWER 12V REGULATOR 5A

The FPV-POWER 12V Regulator is designed to be used with fishfinders needing a minimum of 11V to run. The reason is that at 11V, the battery will still have between 1/4 to 1/3 capacity left however the fishfinder will cut out
FPV10252 – Power Parallel Pigtail 
Description:
The FPV-Power Parallel Pigtail allows you to connect two Batteries of the same capacity in parallel. Need more power the Parallel Pigtail makes it so simple for you to wire two 7Ah or 17.5Ah FPV-Power Wate
FPV10316 - Dash Mounted 2.1Amp USB Dual Port - Plug & Play - Weather + Water Proof Cable
Available - 8/1/19 - Pre Order Available
Description:
Here is an easy solution for installing our new Dual 5V- 2.1a USB Charger for fast charging the beauty of our
Description:

Looking to mount your FPV lithium battery on your Hobie Pro Angler or new outback or much more?! We have the solution to attach it to the sail mast of your fishing kayak. This also suits any mast from 22 to 28mm.

This fits both 7ah and
FPV10289 - Waterproof Shrink Butt Connectors (4PK)
Description:
Great wiring solution for hard to reach or limited space areas. Since no crimping is required for these solder wire connectors, you can easily use them in hard to reach or limited space env
These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery
FPV10259 - 3A Fused Pigtail

Description:

Plug and play Fused Pigtail, male head plugs into the battery with water tight fitting and the other end is bare wires to be wired with your FishFinder, Lights or other accessories.  These holder uses 5mm*20m
These visors were designed to keep the sun and water off the screen when your fish finder is placed in an open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs batter
Hobie for 2016 Model Years they introduced the all New 3-Way thru hull fittings for routing wiring through cockpit area for.
The YakAttack Through Hull Wiring Kit is perfect for installs of fish finders, lighting kits, motors, and anything involving running wiring through the hull of your kayak or boat. This kit is perfect for popular removable pods like the Bonafide Kayaks Dry
These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery
Panel Mount With 48" Wire & SAE Connector
Hobie Battery Holder 12V Part# 72025007
FPV10270 - 3A Fused Pigtail with Female Jack

Description:

Plug and Play Fused Pigtail, male head plugs into the battery with water tight fitting and female plug in for true plug and play wiring. You can add a 10' Pigtail for your wiring or any of t
These visors were designed to keep the sun and water off the screen when your fish finder is placed in an open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs batter
The Hobie H-Rail Ram Ball attachment allows you to attach Ram Ball mounted accessories to the Hobie H-Rail. The Ram ball clamps to the 12-sided H-Rail without any drilling or tools needed. When the clamp is secured, the Ram ball does not twist or slide al
HOBIE - THRU HULL WIRING KIT
Hobie thru hull fittings for routing wiring through cockpit

FishFinders, 
GPS and more. 
Includes:

TWO THRU HULL FITTINGS
BACKING NUTS
O-RINGS
ONE TREE OF DIFFERENT WIRE ADAPTERS
Description:
Looking for a way to mount your FPV 7ah or 17ah battery in your 8 inch round hatch as found in Hobie and various kayaks?
The Batterang Bro features a unique mounting system involving a precision bat like shape and 8 holes drilled through. C
The Power Plug allows you to easily connect most 12v accessories to the Yak-Power system. Whether you want to connect a fish finder, live well pump, navigation light, or other 12v accessory that needs power while you’re out on the water, the Power Plug is
We knew it was time we developed a transducer deployment arm that is truly designed for the task, and the SwitchBlade Transducer Deployment Arm is exactly that. With a single product you can attach the SwitchBlade to either your YakAttack CellBlok, deck m