Mad Frog Gear Blowout: prices are good while supplies last | Shop Now →

FSE Robline Racing Sheet Gray 6MM (656ft Roll)

FSE Robline
$ 842.55
Excl. tax

Available to Special Order (We Will Contact You with Delivery Estimate)

Stock number:
SKU code:

FSE Robline Racing Sheet - Gray 6MM (656ft Roll)

Racing Sheet Pro is the outcome of the continued development efforts of FSE Robline®. Made of a mix of impregnated Dyneema® and XLF, the core provides even greater stability in the cleats and allows sailors to use Racing Sheet Pro even in its stripped state. The cover made out of a Polyamide/Dyneema® weave makes this sheet abrasion resistant and gives it good grip and excellent stretch performance.

Size Diameter daN g/m
American Metric
1/4 in 6 mm 1100 20 gr
5/16 in 8 mm 1900 33 gr
3/8 in 9 mm 2400 39 gr
13/32 in 10 mm 2900 48 gr



  • Spi sheet (1)
  • Jib sheet (2)
  • Main Halyard (3)

  • Dyneema® SK75 / Polyamide 12
  • Dyneema® SK75 / XLF 12

  • Lowest stretch and highest breaking strength
  • Good UV-stability
  • Abrasion resistant
  • Low weight
  • Soft
  • Kink free
  • Good ability on winches
  • Good in cleats
  • High breaking strength
  • Spliceable
  • Low water absorption

Dyneema® core: lowest weight with the highest breaking strength

Polyethylene which is the raw material for Dyneema® is changed on a molecular basis and in addition is stretched in one direction. These stretched molecule chains increase the breaking strength and decrease the elongation. Therefore Dyneema® has the lowest stretch at break of all synthetic fibers. Dyneema® has a very low specific weight and is therefore buoyant. The only disadvantage is that it creeps more than some other raw materials.

This means the cover can easily be removed from the rope ends without reducing the breaking strength due it's fiber shows a permanent elongation under load. Dyneema® is used as core material in high-tech ropes. The core will carry the load whereas the cover is just used for abrasion and light protection. Therefore Dyneema® it has too a good abrasion resistance and resistance against sunlight.


Raw Material UHMWPE
Strength (daN/mm2) 345
Specific Weight (g/cm3) 0.97
Water Intake % 0
Sun Resistance very good
Elongation 3.5
Abrasion Resistance very good
Creep at high loads
Melting Temperature 140°