Our Retail Store and Sail Loft are Open at 25% Capacity.

Hobie Rudder CamTrouble keeping your rudders locked down? The rudder cam is one of the first things to wear out in the Hobie rudder system. If you have the original hollow rivet holding the cam in your casting, you will need to drill it out with a 1/4" bi
Hobie Rudder Blade EPO 3 Part# 20490030
Standard replacement rudder blade for Hobie 14 / 16 / 17 / 18 , along with older Bravo, Getaway and Wave pre-EzLoc rudder systems.
Hobie Screw Delrin Rudder Part# 60450000
Hobie Rudder Cam Sister Screws Pair (All Except H14/16) Part# 5203
Hobie Rudder Cam Stop Plate Part# 20352000
Nyliner 3/8 inch ID (Rudder Pin)
Hobie Rudder Pin H17/18 Part# 60880001
Rudder Cam Kit - for Hobie 17, 18 and 20 (also fits Non-EzLoc Rudders on Brave, Wave, and Getaway)Replace the rudder cam and flared pin with this kit that includes a pair of cams and a pair of binding post screws.
Hobie Rudder Conversion Kith18Blk Part# 60331010
Hobie Rudder Casting Upper Right (All Except H14/16) Part# 50341001
Rudder Casting SpringThe spring used in rudder locking on most Hobie lower rudder castings.
Hobie Lower Rudder Casting (All Except H14/16) Part# 50322001
SCREW,3/8-16X3/4 inch,DELRIN,RAKE
Hobie Rudder Cam Pin (All Except H14/16) Part# 50312301
Hobie Rudder Plunger (All Except H14/16) Part# 50312201
Hobie Rudder Pin H18 Stainless Part# 60880011
Hobie Tiller End Cap Part# 10400010
Hobie Rudder Casting Upper Left (All Except H14/16) Part# 50321001
Stainless Steel Cotter Pin - 3/32 x 3/4 inchThe common cotter pin used for rudder systems. Also used in older Mirage Drives.
HOBIE SCREW - 1/4-20 x 1 inch THMS -P SS - (Tendon) 
BOLT 5/16-18x2 inch (17/18 RUDDER)
Hobie Rudder Pin H18 Cst Gudgeon Part# 60880021