LINE KIT MIRAGE RUDDER / UNIVE
This is a universal kit that can be used to replace rudder control lines on all models of
Hobie Mirage Kayaks. Due to the wide variety of systems installed over the years, not
all components to match each boat are included in this kit.
Features
- Replacement rudder control line kit
- Works for the Up/Down control only
- This model not compatible with the Hobie Adventure Island
- Rudder sold separately
Directions for Installation
This is a universal kit that can be used to replace rudder control lines on all models of
Hobie Mirage Kayaks. Due to the wide variety of systems installed over the years, not
all components to match each boat are included in this kit.
Note: Remove only one control line at a time to help prevent attachment confusion.
1) Note the routing and attachment points of the existing control lines.
2) Remove one control line at a time. Cut the line inside the boat and pull the control line
and tube out the back of the boat.
3) Insert the new control line assembly.
4) Attach the external line to the rudder. Leave some additional line at this point for
possible needed adjustments.
5) Pull the internal control line forward inside the boat and attach to the correct control
arm. If additional line length is required, cut additional line from the spare line included
in the kit.
6) Repeat for each control line.
7) See the owners manual for line adjustment information.
Visit Mariner Sails retail store
Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498
Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.
9am - 5pm Monday- Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)
Learn more about our store