Swage your own oval sleeves with these cadmium-plated steel tools. All tools are plated for rust protection and pre-lubed for working ease. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.
When using the No. 2 or No. 3 tools for loop ends, one oval sleeve will hold full rated cable strength on 7x7 or 7x19 cable. On 1x19 cable, we recommend using two oval sleeves at each end to hold full rated cable strength.
Uses grade 8 bolts for strength and durability
Note: For oval sleeves only. Not for use on stainless steel oval sleeves.
Make your own wires for those special gadgets you like. Swaging pressure is applied with a box or socket wrench. For 1/16", 3/32", and 1/8" wire sleeves.