2019 | End of Season Demo Blow Out! prices are good while supplies last | Shop Now →


Hobie Lower Rudder Casting (All Except H14/16) Part# 50322001
RUDDER CASTING BUSHINGSAre you plagued by sloppy rudders? Do your nyliners keep slipping out? Open up the holes in your rudder castings to 7/16" and install these insulating, self lubricating nylo
Rudder Casting SpringThe spring used in rudder locking on most Hobie lower rudder castings.
Hobie Lower Rudder Bushing (Wave/Bravo/Getaway) Part# 38360001
Hobie Rudder Cam Sister Screws Pair (All Except H14/16) Part# 5203
Standard replacement rudder blade for Hobie 14 / 16 / 17 / 18 , along with older Bravo, Getaway and Wave pre-EzLoc rudder systems.
Rudder Cam Kit - for Hobie 17, 18 and 20 (also fits Non-EzLoc Rudders on Brave, Wave, and Getaway)Replace the rudder cam and flared pin with this kit that includes a pair of cams and a pair of binding post screws.
Hobie Tiller Arm Getaway Part# 37321111
Hobie Rudder Casting Upper Left (All Except H14/16) Part# 50321001
Hobie Screw Delrin Rudder Part# 60450000
Hobie Rudder Cam Stop Plate Part# 20352000
Hobie Rudder CamTrouble keeping your rudders locked down? The rudder cam is one of the first things to wear out in the Hobie rudder system. If you have the original hollow rivet holding the cam in your casting, you will need to drill it out with a 1/4" bi
Hobie Rudder Casting Upper Right (All Except H14/16) Part# 50341001
Hobie Rudder Cam Pin (All Except H14/16) Part# 50312301
Hobie Rudder Plunger (All Except H14/16) Part# 50312201
SCREW,3/8-16X3/4 inch,DELRIN,RAKE
BOLT 5/16-18x2 inch (17/18 RUDDER)