Thousands of In Stock Items ready to ship or pick up


The Bumper Bro is a kayak keel guard that is designed to be mounted to the front of your kayak to avoid damaging it with deep gouges or scratches when landing and launching.
The Garmin Echomap Series Visors are the only shade on the market specifically designed to fit your Echomap fishfinder/chartplotter range. They are light-weight, strong, sturdy, and super easy to install on your unit for maximum benefits.
Casting, snag fishing or just low hanging trees. The LayFlat Rod Storage gives you the ability to lay your rods down on the side of your kayak.
The Humminbird Helix Series Visors are the only shade on the market specifically designed to fit your Helix series Fishfinder/Chartplotter range. They are light-weight, strong, sturdy, and super easy to install on your unit for maximum benefits.
The Bumper Bro is a kayak keel guard that is designed to be mounted to the front of your kayak to avoid damaging it with deep gouges or scratches when landing and launching.
BP1747, Lowrance Elite FS 9 Visor is out of stock at our Dallas location. We have 75 ordered. We can put your order on backorder and we will ship these as soon as they arrive. If you would like this visor sooner please check with our dealers to see if the
The Lowrance HDS Series Visors are the only shade on the market specifically designed to fit your HDS series Fishfinder/Chartplotter range. They are light-weight, strong, sturdy, and super easy to install on your unit for maximum benefits.
BP6035 - Native Watercraft Slayer & MantaRay Seat Risers
Description:
These raisers will change your angle pedaling, Make it easier to stand up and down and give you more storage under the seat.  This is a set of 4 parts to raise the seat on your Native
BP6030 - Titan & Slayer Max- Steering Upgrade Kit - New Version
Turn your Native Titan into a a new kayak with the this steering upgrade. This conversion can be done in 30 minutes and allows the rudder to really bite into the water.

This kit contains
Turn your Native Watercraft into a a new kayak with the this steering upgrade. This conversion can be done in 30 minutes and removes the steering stops which allows the rudder to really bite into the water.

We have designed a new drum and rear disc for
BP1222 - Side Bro A - Right Side (New Design)

The Side Bro is designed to hold your pliers, scissors, fish grips, small red plano box and much more. This is a direct replacement for the Hobie® side pockets or will fit on any flat surface.
BP2614 – HOBIE® GUARDIAN PROTECTOR
In 2019 Hobie® introduced the Guardian Retractable Transducer Shield. We had significant requests from our customers and from our Dealer Network wanting added protection for their Side Imaging transducers for the Guardi
This kit provides the tools required to remove the pedals and upper and lower housings of your Propel drive. This contains a custom 8mm steel spanner with tool steel ends, TIG welded to give you the strength required in dissembling the components for serv
BP1221 - Jig Bucket 25mm (New Design)
The new part includes an extruded pocket on the face with nice hook holders, a drain hole, and contoured sides. These are made to replace the Hobie pockets but can be fit to any flat surface with the provided hardwar
BP2625 - Bucket Bro (Suits Hobie®)

The Bucket Bro is designed with a lip around the top and only 100mm deep so it doesn’t interfere with the bottom of the kayak. It can fit Samaki jig boxes and also the Plano Stowaway (#72020321)

The lip can also be
Reinvent your Native Watercraft with this rudder upgrade. The rudder works by having a spring loaded center section that extends below the hull, giving it more surface area acting on the water. This gives you the ability to have finally let go of the stee
Van Bro A - Tools holder on Left Side - Jig Bro on Right Side
What’s the point in having the ultimate battleship if you can’t remember where you left your tools?

We’ve put together the ultimate kit to organise your life while on board your vessel. Who
NATIVE WATERCRAFT Titan 13/12/Slayer Max -  UPGRADED HANDLE AND BUSHING
We’ve designed this handle to not only upgrade the strength and raise the steering for easy access but to also include a CNC machined bush to reduce the play and support the shaft wh
Garmin™ GT51 & GT52 - SideVu Imaging & ClearVu Imaging Transducer Mount Hobie®​
The Garmin ready transducer mount is designed to fit in the existing Lowrance™ Ready location on the bottom of Hobie® kayaks. This mount and cover is made for the large SideV
BP6041 - Titan 10.5 Aluminum Upgraded Steering Handle
https://www.mariner-sails.com/titan-aluminum-upgraded-steering-handle.html

We’ve designed this handle to not only upgrade the strength and raise the steering for easy access but to also include a
BP2503-A - Garmin Striker 5 & Garmin Vivid 5, Garmin Striker 5Dv
The Garmin Striker & Striker Vivid Series Visors are the only shade on the market specifically designed to fit your Striker series Fishfinder/Chartplotter range. They are light-weight, stro
BP2613 – Lowrance™ StructureScan® 3 in 1 Ready Transducer Mount Hobie®
The 3 in 1 StructureScan® Transducer mount is designed to fit in the existing Lowrance™ Ready location on the bottom of Hobie® Kayaks. The mount and cover for the 3 in 1 StructureScan

Visit Mariner Sails retail store

Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498

Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.

9am - 5pm Monday- Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)

Learn more about our store

Serving water sports enthusiasts for over forty seven years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.

5K+

Happy Customers

50K+

Products in Stock

47+

Years and counting