Native Kayak Parts
Our Groove Adapters can be used with any of our boats Groove Track to mount an incredible variety of gear and accessories. They adjust quickly and easily with a #2 Philips head screw driver.
Fits all Titans, Slayer Propel 10, Slayer Propel 13, Manta Ray Propel Angler 12, Ultimate FX Propel 13, Slayer Propel 12 LT. 25% more surface area than pre-2020 stock rudders for added control. Aluminum post adds stiffness. Includes all needed hardware
Native Watercraft - IM Slider Slug 1/4-20 Insert. This unit has the Slider with the Pad eye with single hole with hook. Used with shock cord as a tie down point.
Native Watercraft Prop Lower Transmission Bearing Part#
Native Watercraft - Thumb Screws
These Thumb Screws can replace the Electronics Console screws provide on 2012 Slayer models. The new screws can be adjusted or removed by hand, eliminating the need for a screwdriver on or off the water.Features:
Low p
These Thumb Screws can replace the Electronics Console screws provide on 2012 Slayer models. The new screws can be adjusted or removed by hand, eliminating the need for a screwdriver on or off the water.Features:
Low p
Native Watercraft - Propel Lubrication Kit
To keep your Propel Pedal Drive (patent pending) operating in peak condition, you should keep it clean and periodically add lubricant to the crank. This kit includes the tools and lubricant used in the genera
To keep your Propel Pedal Drive (patent pending) operating in peak condition, you should keep it clean and periodically add lubricant to the crank. This kit includes the tools and lubricant used in the genera
Native Watercraft - Slide Kit with Pad-Eye Hook - 10/32 Set of 4
Slide Kit with Pad-Eye allows you to lash your load in.
Features:
Purchased in sets of four
Constructed with sturdy plastic
Easily moves forward or backward
&nbs
Slide Kit with Pad-Eye allows you to lash your load in.
Features:
Purchased in sets of four
Constructed with sturdy plastic
Easily moves forward or backward
&nbs
Heighten your Titan X seat to maximize comfortability.
Native Watercraft kayak covers are custom made to fit our kayaks just right.
PRODUCT DESCRIPTION
Includes 2020 pedals and crank arms that come standard on the 701 series Propel Pedal Drive. Retrofittable to all 301 series or newer Propel Pedal Drive units
NOTE: This kit does not include a crank arm puller. The crank arm puller
Includes 2020 pedals and crank arms that come standard on the 701 series Propel Pedal Drive. Retrofittable to all 301 series or newer Propel Pedal Drive units
NOTE: This kit does not include a crank arm puller. The crank arm puller
Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set - 5 or 6) that can be used to secure the cover when traveling through the sewn in loops on the cove
Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set - 5 or 6) that can be used to secure the cover when traveling through the sewn in loops on the cove
Bonafide Fat Grip Bow Handle
$19.99
For the SS107 and SS127 we knew we needed to design a handle that was not only comfortable in your hand while carrying your kayak to and from the water, but also we wanted it to be the closest thing to your body while being carried.
Native Watercraft Roto Block Nylon Part#
Native Watercraft Propel Rudder Drum Part# PRUD007
Native Watercraft Propler Bearing Small Part#
Native Watercraft - Seat 1" Seat Caps - TubingFoot Caps for the Native, Propel, FX and Slayer Seate.Features:
Seat Caps 1"
Seat Caps 1"
Native Watercraft Native Cup Holder Part#
Native Watercraft Slayer Foot Pads Part#
Native Watercraft - Slayer Access Cover
The New Slayer Access Cover allows accessory attachment to the Groove track without requiring tools. This cover can be used to replace covers on 2013 models.
Features:
Can be used to replace covers on
The New Slayer Access Cover allows accessory attachment to the Groove track without requiring tools. This cover can be used to replace covers on 2013 models.
Features:
Can be used to replace covers on
Visit Mariner Sails retail store
Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498
Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.
9am - 5pm Monday- Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)
Learn more about our store
Serving water sports enthusiasts for 50 years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.
20K+
Happy Customers
50K+
Products in Stock
50
Years and counting