We encourage social distancing and wearing face masks when possible.

Products tagged with BerleyPro


The Side bro is designed to hold your pliers, scissors, fish grips, small red Plano box and much more. This is a direct replacement for the Hobie® side pockets.

Example - Order based on how you want to set up your boat for example the BP1203 (B) would

BerleyPro Orb

$189.00
The BerleyPro Orb is a 12v, 3 piece collapsible light perfect for that boat or kayak. With IP68 LEDs orientated at 360 degrees and angled over head this can be used as either an anchor light or permanent running light on your kayak.Our specific selection
Description
Organize your kayak the right way with a JB Edition Side bro. These are made to fit the existing Hobie® mesh pockets on the sides or the rectangular box. Great for storing tackle boxes, soft plastics and much more these can be mounted to an
Turn your Native Watercraft into a a new kayak with the this steering upgrade. This conversion can be done in 30 minutes and removes the steering stops which allows the rudder to really bite into the water.

We have designed a new drum and rear disc for
Casting, snag fishing or just low hanging trees. The LayFlat Rod Storage gives you the ability to lay your rods down on the side of your kayak.
Van Bro A - Tools holder on Left Side - Jig Bro on Right Side
What’s the point in having the ultimate battleship if you can’t remember where you left your tools?

We’ve put together the ultimate kit to organise your life while on board your vessel. Who
Garmin™ GT51 & GT52 - SideVu Imaging & ClearVu Imaging Transducer Mount Hobie®​
The Garmin ready transducer mount is designed to fit in the existing Lowrance™ Ready location on the bottom of Hobie® kayaks. This mount and cover is made for the large SideV
This kit provides the tools required to remove the pedals and upper and lower housings of your Propel drive. This contains a custom 8mm steel spanner with tool steel ends, TIG welded to give you the strength required in dissembling the components for serv
Turn your Native watercraft into a new kayak with this steering upgrade. This conversion can be done in 30 minutes and removes the steering stops and allows the rudder to really bite into the water.
The perfect tool organiser for under a hatch, side of a boat or in your kayak.
This holds braid scissors, 8 inch pliers, small knifes and anything you want in the pouch like leader or soft plastic bags!
These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery
BerleyPro "BerleyPro" Flag Part# BP1405
The TripleShot ready transducer mount is designed to fit in the existing Lowrance Ready location on the base of Hobie® kayaks. These mount and cover the TripleShot transducer which comes with the Lowrance Hook2 range providing protection and also maintain
BerleyPro Right-Handed Slayer 10 Battery Mount Part# BP6018
Want to get rid of that rooster tail screaming off of your transducer? Save spending hours cleaning the spray off the back of the boat with this handy little contraption.
BerleyPro 20M Twin Core Marine Cable 5A Part# BP1411
The HumminBird™ Ready transducer mounts are designed to fit in the existing Lowrance Ready location on the base of Hobie® Kayaks. These clamp the Humminbird™ transducer onto the mounting plate giving it no chance of falling sideways. The ABS plastic is de
The HumminBird™ Ready transducer mounts are designed to fit in the existing Lowrance™ Ready location on the bottom of Hobie® Kayaks. These clamp the Humminbird™ transducer onto the mounting plate giving it no chance of falling sideways. The ABS plastic is
This dimmer has been specifically designed to be run with the BerleyPro light range. This is made from a 3d printed housing and a modified toggle switch which is then epoxy filled to remain waterproof. This comes with a waterproof boot and 10cm of wiring
The Propel Power Pack is the perfect add on for installation of powered accessories in the Native Watercraft range. This allows your Nocqua 10ah water resistant Lithium Ion Batteryattery to fit directly behind you in the existing round cavity with recesse
The Raymarine Axiom ready transducer mount is designed to fit in the existing Lowrance Ready location on the base of Hobie® kayaks.
The mount and cover plate for the Raymarine RealVision 3D Transducer provides protection to the transducer while maintaini
BerleyPro Tacklepod Stand - Viking Part# BP1106
The Raymarine Ready transducer mounts are designed to fit in the existing Lowrance™ Ready location on the base of Hobie® Kayaks. These clamp the Dragonfly transducer onto the mounting plate givingit no chance of falling sideways. The ABS plastic is design
BerleyPro Propel Power Pak Part# BP6005