Cameras & Mounts
Show them that you fish tale is not a tall tale. We carry a full line of cameras and mounts to record your favorite fishing moments. Don't see what you want? Check out our full line of kayak fishing accessories or give us a call at 972-241-1498, and we can probably find what you're looking for.
FPV-Power Switch Pigtail
$21.49
FPV10308 - Switch Pigtail
Description:
Pigtail with built in push button on/off switch and male. Switch rated for 3A max.
Description:
Pigtail with built in push button on/off switch and male. Switch rated for 3A max.
The FPV-POWER 10mm Spacer for Dash mount is used to decrease the in hull space needed to install.
Made in the USA
Covered by our Built for Life Guarantee
SKU: LNL-1004
Covered by our Built for Life Guarantee
SKU: LNL-1004
The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.
NOCQUA Plug ’n’ Play Cables expand the installation options for those seeking an intuitive rigging layout on the vessel. The Cables are available in 2 foot, 6 foot, and 12 foot lengths and feature the NOCQUA water-tight connection ports that are universal
2.5" round plate connects to RAM® device holders containing the universal AMPS hole pattern
Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustabilit
Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustabilit
This 4” extension arm allows you to increase the height and adjustability of your YakAttack accessory that features the LockNLoad™ mounting system like rod holders, fish finder mounts, and more.
YakAttack MightyMount Switch
$17.95
With an identical hole pattern as old school deck mounts this mount can be used to switch to a deck mount that accommodates modern track accessories without the need to drill more holes.
MightyMount II with Full Back Backing Plate
SKU - MMH2-FB
SKU - MMH2-FB
YakAttack MightyMount II
$12.95
Mighty Mount II is 2"x2.375"x.5"
Contains all necessary hardware
Contains all necessary hardware
Easily extend the control cable of the Power Panel switching system and locate your controller up to 6ft further away from the switch box. For use with YP-RP5R Power Panel switching system only!
Designed for light duty use, this C size (1.5”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution.
Charge two mobile devices on the go
Made with corrosion resistant materials which ensure a solid contact and low voltage drop.
Fits in same mounting hole as a traditional 12 Volt outlet
Compatible with most mobile devices including Apple® products
Pro
Made with corrosion resistant materials which ensure a solid contact and low voltage drop.
Fits in same mounting hole as a traditional 12 Volt outlet
Compatible with most mobile devices including Apple® products
Pro
A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infi
The RAM-202U-24 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 3.5" center to center. Overall plate dimensions are 2" x 4".
RAM Mounts Humminbird 100, 300, 500, 700 Series, Matrix Series And Lowrance Elite-5 Series
Sale
$20.99 $20.99
The RAM-107BU is a marine grade aluminum base with 1.5" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices.
The RAM-202U-153 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1" x 2.5" center to center. Overall plate dimensions are 1.5" x 3".
Visit Mariner Sails retail store
Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498
Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.
9am - 5pm Tuesday - Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)
Learn more about our store
Serving water sports enthusiasts for 50 years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.
20K+
Happy Customers
50K+
Products in Stock
50
Years and counting