We encourage social distancing and wearing face masks when possible.


Casting, snag fishing or just low hanging trees. The LayFlat Rod Storage gives you the ability to lay your rods down on the side of your kayak.
Turn your Native Titan or Slayer Max into a a new kayak with the this steering upgrade. This conversion can be done in 30 minutes and allows the rudder to really bite into the water.
BP6035 - Native Watercraft Slayer & MantaRay Seat Risers
Description:
These raisers will change your angle pedaling, Make it easier to stand up and down and give you more storage under the seat.  This is a set of 4 parts to raise the seat on your Native
Turn your Native Watercraft into a a new kayak with the this steering upgrade. This conversion can be done in 30 minutes and removes the steering stops which allows the rudder to really bite into the water.

We have designed a new drum and rear disc for
BP6036 - Native Watercraft -  Seat Risers - Titan - Slayer XC - Slayer MAX

Description:
These risers will change your angle pedaling, Make it easier to stand up and down and give you more storage under the seat.  This is a set of 4 parts to raise the
Titan 13.5 Aluminum Upgraded Steering Handle and Bush

We’ve designed this handle to not only upgrade the strength and raise the steering for easy access but to also include a CNC machined bush to reduce the play and support the shaft when turning.
Turn your Native watercraft into a new kayak with this steering upgrade. This conversion can be done in 30 minutes and removes the steering stops and allows the rudder to really bite into the water.
BP6041 - Titan 10.5 Aluminum Upgraded Steering Handle
https://www.mariner-sails.com/titan-aluminum-upgraded-steering-handle.html

We’ve designed this handle to not only upgrade the strength and raise the steering for easy access but to also include a
BP 67038 - Slayer 10/13/MantaRay Upgraded Handle and Bush


We’ve designed this handle to not only upgrade the strength and raise the steering for easy access but to also include a CNC machined bush to reduce the play and support the shaft when turning
This kit provides the tools required to remove the pedals and upper and lower housings of your Propel drive. This contains a custom 8mm steel spanner with tool steel ends, TIG welded to give you the strength required in dissembling the components for serv
Reinvent your Native Watercraft with this rudder upgrade. The rudder works by having a spring loaded center section that extends below the hull, giving it more surface area acting on the water. This gives you the ability to have finally let go of the stee
NATIVE WATERCRAFT Titan 13/12/Slayer Max -  UPGRADED HANDLE AND BUSHING
We’ve designed this handle to not only upgrade the strength and raise the steering for easy access but to also include a CNC machined bush to reduce the play and support the shaft wh
P6031 – Native Watercraft Steering Tension Plate
Done the BerleyPro steering upgrade and don’t want the knot on the rear? We now have a new plate that you can use with two screws to keep it simple and sexy.
The Propel Power Pack is the perfect add on for installation of powered accessories in the Native Watercraft range. This allows your Nocqua 10ah water resistant Lithium Ion Batteryattery to fit directly behind you in the existing round cavity with recesse
BerleyPro Propel Power Pak Part# BP6005
BerleyPro - 6" Round Hatch Battery Mount

This battery mount is made to be attached to the underside of a 6 inch hatch lid or bigger. This allows you to run power supplies for lights, cameras and sounders and have it easily removable while you are loadi
This battery mount has been designed to fit the Native Watercraft Slayer 10 Propel and provide a high, dry, and solid place to put your battery. The mount is built tough with anodized aluminum and uses stainless steel fasteners which replace the two stock
BerleyPro Right-Handed Slayer 10 Battery Mount Part# BP6018