Hobie Mirage Drive GT/V2 Parts
Hobie Mirage Drive Fin
$50.99
Mirage Drive Fin Includes:
One Fin
One Clevis Pin
One Split Ring
One Fin
One Clevis Pin
One Split Ring
Hobie - GTT Turbo Mask Kit - Sprocket / Mast Kit Turbo
Hobie Set Screw Mirage Drive Part# 53170020
Mirage Drive Standard Mast - Threaded for V2 drives.
A replacement mast for the Standard or ST fins only. It is too short for the ST Turbo fins.
These are very durable, but will eventually work harden and fail if bent back into alignment enough time
A replacement mast for the Standard or ST fins only. It is too short for the ST Turbo fins.
These are very durable, but will eventually work harden and fail if bent back into alignment enough time
The drive well seal keeps the seat area drier. Seals the aft end of the Mirage Drive well. Limits the incursion of water into the cockpit caused by the surge action of the drive fins. Testers also claim some improvement of forward thrust.
Mirage Drive ST Turbo Mast - Threaded for V2 drives.A replacement mast for the ST Turbo fins only. It is too long for the other fins.These are
Hobie Roller Drum Bearings (15) Part# 81156401
Hobie Mirage GT Spare Parts Kit
$200.00
Hobie Mirage GT Spare Parts Kit Part# 80010401
Hobie - GT Turbo Mask Kit - Sprocket / Standard Mast Kit
Mirage Drive Pedal Adjustment Pin - priced each. Two required per drive.The pedal adjustment pin is stainless steel and should last forever.Shown installed on Adjustment Assembly (not included)
Hobie Cap Pedal Crank
$2.19
Hobie Cap Pedal Crank.
Replacement Glide Tech roller bearings for Hobie MirageDrive. Sprocket, drum and idler pulley versions available.. Sold individually
Stainless Steel Clevis Pin - 3/16 x 5/8 inch
Mirage Drive Replacement Pedal Strap - Right SideFor the newer pedal/crank assemblies only.Image is representative. No pedal included.
Hobie Pedal Pad MD180
$11.49
*pad not included
Hobie Sprocket Shaft Mirage
$36.99
Mirage Drive Sprocket Shaft - for both newer and older drives.The sprocket shaft is held into the spine by a set screw located between the sprockets. Since it is stainless steel, it should be a low failure item. But it is possible to bend the shaft if the
HOBIE - ALLEN WRENCH 5/64"
Visit Mariner Sails retail store
Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498
Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.
9am - 5pm Monday- Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)
Learn more about our store
Serving water sports enthusiasts for 50 years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.
20K+
Happy Customers
50K+
Products in Stock
50
Years and counting