Switching System Included Controller & Relay Module
Lights! Power! Charging! Yak Power is 12V Plug-and-Play Connectivity for Your Kayak!
Why cut and splice when you can just Plug-and-Play? The new Power Panel switching system is an electronics control system designed to make it quick and easy for you to add and control 12v electronics on your kayak. With 5 switched outlets, you can connect your fish finder, bait well pump, LED lighting, phone charger, and any other 12v accessory you need out on the water. All accessories are connected and controlled independently using individual buttons on the control panel. Each button turns RED when it is activated making it easy to see which buttons are in use. And, the Master Power switch allows you to completely power up-down the entire system with the press of a button to minimize your power consumption while out on the water.
The Power Panel switching system uses all Yak-Power plug-and-play connectors making it easy to configure and add accessories. Powering the system is simple. It plugs directly into our Power Pack battery box (YP-BBK) or Battery Terminal Pig Tails (YP-BTP12 or YP-BTP96). No cutting or splicing is required!
Yak-Power lets you spend less time wiring and more time fishing.
Always make sure the Yak Power plug-and-play connectors are completely pushed together when connecting the system together.
All SAE connectors are not exactly alike. Yak Power uses our own custom tooled, high tolerance, very snug fitting connectors with larger gauge real copper wire to insure a quality, weatherproof, and reliable connection.
All Yak-Power plug and play accessories are specifically designed to work together while maintaining the correct battery polarity throughout the entire Yak-Power system. Use of other aftermarket connectors or splicing other connectors into the Yak-Power system may cause damage to the system or to the accessories connected to the system and void your warranty.
CAUTION: Always pay attention to the actual wire colors of all Yak-Power accessory cables to insure that the RED (+) wire is always connecting to the RED (+) wire on the connector into which it is being plugged.