Fish Finder Accessories
This is our collection of mounts, visors, transducer covers, batteries and installation hardware. We are constantly expanding our offerings in this department so check back often. If you do not find what you are looking for please give us a call, 972-241-1498
This is our collection of mounts, visors, transducer covers, and installation hardware. We are constantly expanding our offerings in this department so check back often. If you do not find what you are looking for please give us a call, 972-241-1498
This is our collection of mounts, visors, transducer covers, and installation hardware. We are constantly expanding our offerings in this department so check back often. If you do not find what you are looking for please give us a call, 972-241-1498
These plates are designed to fit into your kayaks hatch and be used to mount Batteries or can be custom drilled to fit any switch, charger, Solar charging port etc you'd like. Slots are designed to fit 1 or 2 Nocqua 10ah batteries exactly. You can also mo
Simply snap the star pattern RAM mount into the back of the head unit, just like our other plug-in RAM fishfinder mounts.
Easily extend the control cable of the Power Panel switching system and locate your controller up to 6ft further away from the switch box. For use with YP-RP5R Power Panel switching system only!
LED Back Lighted Waterproof Inline 12v Switch - 16A
Whether you want to connect a fish finder, live well pump, navigation light, or other 12v accessory that needs power while you’re out on the water, the Power Plug is all you need to power them up.
Battery Terminal Connector With 12" Pig Tail - SAE to Spade
YakPower Power Adapter Kit
$17.99
Yak-Power uses our own custom tooled, high tolerance, very snug fitting connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection.
The YakPower Power Pack Battery Box delivers portable 12V power with integrated USB charging, built-in master switch, and water-resistant design for outdoor use.
Panel Mount With 144" Wire & SAE Connector
Panel Mount with 96" Wire & SAE Connector
Designed for light duty use, this C size (1.5”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution.
RAM Lowrance Hook2 Series 4X & 5 FishFinder Ball Adapter 1"
Designed for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution.
Designed for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution.
The Rooster Rooter is a rooster tail minimizer designed for your Lowrance TotalScan Transducer. Made from 3mm ABS plastic in Australia, it can be used on your Totalscan or 3D structure transducer for Lowrance or Simrad units.
i-Series Fishfinder Install Kit
$335.00
This kit will install on any Hobie inflatable kayak with the new Vantage seat.
This socket technology allows for almost infinite adjustment and perfect viewing angles.
The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infi
The RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter.
The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices.
The RAM-202U-24 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 3.5" center to center. Overall plate dimensions are 2" x 4".
RAM Mounts Humminbird 100, 300, 500, 700 Series, Matrix Series And Lowrance Elite-5 Series
Sale
$20.99 $20.99
The RAM-107BU is a marine grade aluminum base with 1.5" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices.
The RAM-202U-153 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1" x 2.5" center to center. Overall plate dimensions are 1.5" x 3".
Waterproof paper backing to provide superior finishing for both wet and dry applications on a variety of substrates, including paint, primer, gel coat, metal, and wood.
Visit Mariner Sails retail store
Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498
Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.
9am - 5pm Tuesday - Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)
Learn more about our store
Serving water sports enthusiasts for 50 years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.
20K+
Happy Customers
50K+
Products in Stock
50
Years and counting