Brostaff Favorites
The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infi
An excellent addition to the left side of your boat, the Track Base is designed to not loosen while trolling. You’ll have plenty of room to take advantage of the RAM-ROD’s tilting cradle and ability to rotate 360 degrees.
The RAM-B-201U-A, Short length double socket arm, has a socket at both ends that accommodates B Size 1" balls. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.
The RAM-202U-24 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 3.5" center to center. Overall plate dimensions are 2" x 4".
The rectangular plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
3M 5200 Marine Sealant
$19.59
3M™ Marine Adhesive Sealant 5200 is a one-component, high-strength, moisture-curing, gap-filling polyurethane for permanent bonding of wood, gelcoat and fiberglass.
Designed specifically to fit the Wilderness Systems A.T.A.K. 140/Radar 115/135, the Stern Mounting Plate allows for mounting aftermarket accessories such as battery-operated stakeout poles, trolling motors, and more.
Pre-drilled for mounting directly
Pre-drilled for mounting directly
The commonly used padeye design is a thing of the past and was never truly intended to be used on a kayak in the first place.
We knew it was time we developed a transducer deployment arm that is truly designed for the task, and the SwitchBlade Transducer Deployment Arm is exactly that.
Designed to replace the factory base on Lowrance fishfinders, the Lowrance Fishfinder Mount is a simple, clean, and highly effective solution for mounting your fishfinder. Attaches to track using our new LockNLoad™ mounting system for maximum versatility.
Transport your kayak safely with these custom designed saddles that conform to the most popular hull shapes.
Accommodates kayaks up to 36" wide and weighing 75 lbs.
Accommodates kayaks up to 36" wide and weighing 75 lbs.
Thule Get-a-Grip Fully lockable multipurpose holder for carrying paddles, oars and masts. Features Fully lockable holder for paddles, masts, oars, and other similar sized items.
404 High-Density Adhesive Filler is an epoxy thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap filling with epoxy where maximum strength is
Length: 50", 58" or 65"
Our company has been around since 1975, and is a pillar of the sailing, kayaking, windsurfing, SUP, and other water sports related communities. Our venerable brand is now recognized across the United States and beyond!
Visit Mariner Sails retail store
Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498
Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.
9am - 5pm Monday- Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)
Learn more about our store
Serving water sports enthusiasts for 50 years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.
20K+
Happy Customers
50K+
Products in Stock
50
Years and counting