Fish Finder Accessories
This is our collection of mounts, visors, transducer covers, batteries and installation hardware. We are constantly expanding our offerings in this department so check back often. If you do not find what you are looking for please give us a call, 972-241-1498
This is our collection of mounts, visors, transducer covers, and installation hardware. We are constantly expanding our offerings in this department so check back often. If you do not find what you are looking for please give us a call, 972-241-1498
This is our collection of mounts, visors, transducer covers, and installation hardware. We are constantly expanding our offerings in this department so check back often. If you do not find what you are looking for please give us a call, 972-241-1498
Panel Mount With 144" Wire & SAE Connector
Panel Mount with 96" Wire & SAE Connector
Panel Mount With 48" Wire & SAE Connector
Switching System Included Controller & Relay Module
Designed for light duty use, this C size (1.5”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution.
RAM Lowrance Hook2 Series 4X & 5 FishFinder Ball Adapter 1"
Designed for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution.
Designed for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution.
BerleyPro Rooster Rooter - Rooster Tail minimizer for your Lowrance TotalScan Transducer
Sale
$24.00 $12.00
The Rooster Rooter is a rooster tail minimizer designed for your Lowrance TotalScan Transducer. Made from 3mm ABS plastic in Australia, it can be used on your Totalscan or 3D structure transducer for Lowrance or Simrad units.
Finally truly portable fish finder battery for powering your sounder, GPS, and other outdoor electronics!
Lightweight, durable, and water resistant!
Lightweight, durable, and water resistant!
This kit will install on any Hobie inflatable kayak with the new Vantage seat.
Charge two mobile devices on the go
Made with corrosion resistant materials which ensure a solid contact and low voltage drop.
Fits in same mounting hole as a traditional 12 Volt outlet
Compatible with most mobile devices including Apple® products
Pro
Made with corrosion resistant materials which ensure a solid contact and low voltage drop.
Fits in same mounting hole as a traditional 12 Volt outlet
Compatible with most mobile devices including Apple® products
Pro
The RAP-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base.
Keeping things simple and versatile, the new RAM Ball Wedge Mounts are a great way to provide a mounting point to practically anything. Simply slide the wedge into the round opening of your rod holder base and tighten the screw. The new RAM Ball Wedge Bas
The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infi
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. This transducer mount enables quick, effective deployment and retrieval of your Lowrance StructureSc
The RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter.
The RAM-B-201U-A, Short length double socket arm, has a socket at both ends that accommodates B Size 1" balls. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.
The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices.
The RAM-202U-24 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 3.5" center to center. Overall plate dimensions are 2" x 4".
The rectangular plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Visit Mariner Sails retail store
Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498
Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.
9am - 5pm Monday- Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)
Learn more about our store
Serving water sports enthusiasts for 50 years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.
20K+
Happy Customers
50K+
Products in Stock
50
Years and counting