Mariner Sails Demo Day Rescheduled to May 17th


A soft and tacky non-skid material featuring a soft crosshatch pattern with a peel & stick performance acrylic adhesive for bonding to HPDE, polyethylene, aluminum, and fiberglass.
Harken Pad Eye Large SS Diamond Part# 97653011934
Hobie Bearing Set (2 Cylinders) Part# 61852000
Hobie Downhaul Kit 3:1 H14/16 Part# 2081
Hobie Pin Qr 1/4-3/4In Cup Part# 20302
Hobie Fastpin Cup Head 1/4In X 1In Part# 20305
Hobie Anchor Pin Part# 20100000
GUDGEON SCREWS - LONG LOCKNo more re-tightening gudgeon screws. As of 1996, Hobie Cat changed gudgeon screws on all new boats to “long lock” screws. Similar to a Nylock Nut, this screw
Hobie Mast Stepper Base Bracket Part# 92170011
Hobie Mast Keeper Hinged Gate Assembly Part# 90500022
Harken Low Load Folding Padeye 6mm Part# 97653218500
Harken Block 38mm Big Bullet Single With Becket Part# HAR 126

Winch Covers

Sail Loft
$39.95
Mariner Sails Winch Cover - made from Sunbrella fabric.Our winch covers are made using Sunbrella fabrics and Gore Tenara thread for maximum durability. An internal, replaceable shock cord will keep the cover on your winch even in high winds.
VISIFlag™, GearTrac™ Ready, Includes Mighty Mount
Native Watercraft - Interior Battery Pack

The Interior Battery Pack easily mounts in the Console of the Slayer and Slayer Propel series. It is the perfect size for most small electronics batteries. The unique design suspends the battery off the bottom
Native Watercraft - Anchor Trolley System
The Anchor Trolley System allows anglers to fish from any direction without having to stand up and move.  It allows you to position the anchor to any point along the side of the boat while seated, without moving
Hobie Sup Leash Coil 10Ft Part# 470145-10
Hobie Fast Shackle Part# 3062
Paddle Retainer Kit - for Hobie Adventure IslandIf you want to have the on-Aka paddle storage, then update your pre-2008 Adventure Island with this kit. Includes all necessary hardware. Drilling is required.
CONTROL LINE, SUM w/KNOT COVERThe steering lines which run inside the board, connecting the steering wires to the rudder housing assembly.
Mirage Drive ST Turbo Mast - Threaded for V2 drives.A replacement mast for the ST Turbo fins only. It is too long for the other fins.These are
Mirage Drive ST Turbo Mast - non-threaded for pre-V2 drives.A replacement mast for the ST Turbo fins only. It is too long for the other fins. These are very durable, but will eventually work harden and fail if bent back into alignment enough times. So if

Visit Mariner Sails retail store

Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498

Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.

9am - 5pm Monday- Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)

Learn more about our store

Serving water sports enthusiasts for 50 years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.

20K+

Happy Customers

50K+

Products in Stock

50

Years and counting