Thousands of in stock items that ship same day

Yak-Attack

Yak-Attack SideStage Pro Rod Rack With TurnKey Adapters

$ 84.95
Excl. tax
In-Stock



⚠️ WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Stock number:
YA RHM-1010
UPC/EAN code:
819731016972
SKU code:
RHM-1010

New to the YakAttack arsenal for 2024 is the SideStage Pro. The SideStage Pro is our take on a horizontal rod stager, but with all of the innovation and adjustability you would expect from YakAttack. This system is sold as a pair and comes with everything you need to stage and secure up to three rods. It introduces an all-new attachment system called ClickTrac. The ClickTrac Rail System allows you to easily attach, adjust and remove your accessories with the push of a button.

The SideStage is offered in three variations. The SideStage, the SideStage Pro, and the Side Stage Pro with TurnKey Adapters. The SideStage Pro with TurnKey Track Adapters is an upgraded version of the SideStage that is similar to its other variations in every way, except how it attaches to your track system. This version is design specifically for use on aluminum power boats that feature some form of a gunwale track system, like Tracker’s Versa Track or Lund’s SportTrak. It attaches to the track system using our LockNLoad system and our specially designed TurnKey bolt. Once attached to the boat, like all products found in the LockNLoad family, you have the ability to quickly connect and disconnect from the track base and pivot a full 360 degrees.

The ClickTrac Rail is a new mounting platform that features a series of teeth on the top and bottom of the rail which give you the base to attach and adjust. Attach the ClickTrac Rail to the track adapter by depressing the orange button on the track mount and sliding the bottom of the ClickTrac Rail through the clamp. Once you remove pressure from the mount button, the rail will lock into place. Use this same process to adjust the overhang of the rail to achieve the desired positioning. The top half of the SideStage will be the same for all models and will come with three FlipGrips on each ClickTrac Rail. The FlipGrip slides along the top of the rail the same as the rail rides in your track mounted clamp. By depressing the orange FlipGrip release button, the cradle is free to slide up and down the ClickTrac Rail.

The FlipGrip features three positions. In the “Open” position, it can be used simply as a rod stager. Next is the “Closed” position, where the FlipGrip gets its name. By flipping the retaining lever over a rubber band stretches over your rod to apply positive pressure on varying sizes of rod diameters. Finally, on the front of the FlipGrip, there is a locking lever. Flip the locking lever up and over the retention lever to use the “Locked” position for extra security.

The mechanics of the FlipGrip allow you to apply the same pressure to rod butts and rod tips alike, and as mentioned above, the FlipGrip will work with your paddle, an anchor pole, or any tool with a diameter up to 1.25 inches.

Injection-molded from UV stabilized polymers, the FlipGrip will last for many years, even in harsh marine environments.

 

Compatible with a wide variety of boat brands featuring a built-in track on the gunwale including the following:

Ranger Boats Lock-track

Crestliner SureMount and Lock Track

G3 Boats

Lund Boats SportTrak

Xpress Boats

War Eagle Boats - 45 degree T-Lock/Cap Rail

Lowe Boats

Duracraft Boats - 45 degree T-Lock/Cap Rail

Triton Boats Lock-track

Tracker Boats Versatrack

Excel Boats

 

  • Sold as a pair
  • Stage and secure up to three rods
  • For use with aluminum boats that feature a gunwale track system
  • Horizontal Rod Stager
  • Requires two attachment points
  • Track Mounted
  • Compatible with Spinning and Casting gear
  • Designed for terrain where vertical rods don’t make sense
  • Features Two ClickTrac Rails – 14” Rails
  • Includes six (6) FlipGrips with retention bands
  • Includes three (3) additional retention bands
  • Includes two ClickTrac RailClamps
  • Adjust rail positioning / overhang with the push of a button
  • Build for use in harsh marine conditions
  • Includes rubber bumpers for soft opening and closing
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: RHM-1010
  • UPC: 819731016972

 Add
Use commas to separate tags

Visit Mariner Sails retail store

Mariner Sails, Inc., 11110 N. Stemmons Fwy, Dallas, TX 75229, 972-241-1498

Come down to our retail store to experience the largest collection of Kayaks - be amazed by the vast options in accessories or come have a chat with our staff members - experienced sailors, kayak anglers, windsurfers - with over 100 years of combined "on-the-water" experience.

9am - 5pm Monday- Friday (Temporary Hours)
10am - 4pm Saturday (Loft Closed on Saturday)

Learn more about our store

Serving water sports enthusiasts for over forty seven years specializing in Kayaking, Windsurfing, SUP, Sailing and Sail Making.

5K+

Happy Customers

50K+

Products in Stock

47+

Years and counting